Viton® 75 Specifications
VITON® (FLUOROCARBON) 75 DUROMETER
Rubber Specifications
Welcome to our Viton® Specifications Section
Here you will find our Viton® specifications chart which can also be downloaded in PDF. The Viton® properties that are listed below are for our most popular Viton® 75 durometer (75A) rubber material. Make sure you review all of our other popular materials to ensure that the material you choose is correct for your application. If you need properties that are slightly different than the ones listed below, we can compound the formulation of the rubber material so that the Viton® rubber specifications suit your needs. Finding the correct material is important as the seal can degrade easily if the material is not compatible with the environment.
Viton FKM is DuPont-Dow Elastomer’s trade name for fluorocarbon elastomers. Fluorocarbon elastomers exhibit excellent resistance to high temperature and low compression set. They respond very well with resistance to ozone, high temperatures, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals over a temperature range of -25°F to +400°F. Low temperature resistance for static applications is limited to approximately –40°F (–40°C) under special formulation. Under dynamic conditions, the lowest service temperature is between 5°F and 0°F (–15°C and –18°C). Gas permeability is very low and similar to that of butyl rubber. Special formulation can also improve resistance to water, steam, acids and fuels.
Download Viton® 75 Information in PDF
ASTM Designation | ORIGINAL PROPERTIES | ASTM D2000 SPECIFICATION |
---|---|---|
Durometer, Shore A | 75+/- 5 | |
Tensile, psi (MPa), Minimum | 1450 (10) | |
Elongation, % Minimum | 150 | |
Specific Gravity | - | |
A1-10 | HEAT AGE, 70 HRS @ 250 C | |
Durometer Change, Points | +10 | |
Tensile Strength Change, % Maximum | -25 | |
Elongation Change, % Maximum | -25 | |
B38 | COMPRESSION SET, 22 HRS @ 200 C | |
Original Deflection, % Maximum | 15 | |
C12 | RESISTANCE TO OZONE | |
ASTM D1171, Method B | No Cracks | |
C20 | RESISTANCE TO OUTDOOR AGING | |
ASTM D1171 | No Cracks | |
EF31 | FUEL AGE, 70 HRS @23C in Reference Fuel C | |
Durometer Change, Points | +/-5 | |
Tensile Change, % Maximum | -25 | |
Elongation Change, % Maximum | -20 | |
Volume Change, % | 0/+10 | |
EO88 | FLUID RESISTANCE, 70 HRS @200C in | |
Stauffer 7700/SAE Fluid No. 2 | ||
Durometer Change, Points | -15/+5 | |
Tensile Change, % Maximum | -40 | |
Elongation Change, % Maximum | -20 | |
Volume Change, % Maximum | +25 | |
F15 | LOW TEMPERATURE BRITTLENESS | |
ASTM D2137, Method A, 9.3.2 | ||
3 Minutes @ -25 C | Non-Brittle |
SPECIFICATIONS MET
ASTM D2000-01 Grade M6HK810 A1-10 B38 C12 C20 EF31 EO88 F15